How it Works

 WINPOSTURE 

  schematic diagram

Usage Steps

As a first step, adjust the straps to an appropriate length

After wearing the corrector, turn on the switch, and then straighten up your back

Maintain the correct posture for 4 seconds until the corrector vibrates

At this time, your correct posture has been recorded

When you bend your back, bow or hunch back

 It reminds you to lift your chest and raise your head via vibration

As a first step, adjust the straps to an appropriate length

After wearing the corrector, turn on the switch, and then straighten up your back

Maintain the correct posture for 4 seconds until the corrector vibrates

At this time, your correct posture has been recorded

When you bend your back, bow or hunch back

It reminds you to lift your chest and raise your head via vibration

Common problems

 

1. If the posture corrector is not sensitive, users can tighten the straps appropriately. Meanwhile, during initialization,
the back should be straight and the chest should be expanded as much as possible.

2. If the posture corrector is excessively sensitive, users can loosen the straps appropriately. Where the cause is frequent
vibration during correction of sitting posture, users can sit properly, re-initialize, and click the power on once.
In this way, the tension sensor is turned off, and only the angle sensor is turned on. Moving arms at this time does not

trigger vibration.

3. If the host fails to boot, please charge for 10 minutes, and then check if it can boot. If there remains no response, please
contact customer service, we will serve you 24 hours online.

Indicator light description

Vibration description

Common problems

1. If the posture corrector is not sensitive, users can tighten the straps appropriately. Meanwhile, during initialization,

the back should be straight and the chest should be expanded as much as possible.

2. If the posture corrector is excessively sensitive, users can loosen the straps appropriately. Where the cause is frequent
vibration during correction of sitting posture, users can sit properly, re-initialize, and click the power on once.
In this way, the tension sensor is turned off, and only the angle sensor is turned on. Moving arms at this time does

not trigger vibration.

3. If the host fails to boot, please charge for 10 minutes, and then check if it can boot. If there remains no response, please
contact customer service, we will serve you 24 hours online.

Product specifications

Note: Before purchasing, please check the weight carefully and select the corresponding

model.

Suitable for weight:  60 kg  to 110 kg

Suitable for weight:  40 kg to 60 kg

Suitable for weight:  15 kg to 40 kg

Note:

For each re-wearing, a 4-seconds data acquisition step is required

prompt:

1. Develop a habit of straightening your back. Effect can only be attained after
prolonged persistence.
2. Persistent in actively straightening your back is the only efficient path to health.
3. Other forced stretching correctors do harm rather than good.
4. Please read this instruction carefully.